High Temperature Semiconductor Vacuum Oven

• Customization: Available
• After-sales Service: Remote Service, in-Door Service
• Warranty: One-Year Warranty
• Model NO.: GZ-BDT-VC-001
• Movement Way: Fixed
• Flow: Contra-Flow
• Heating Mode: Transmission
• Material Status: Solution, Strap, Bulk
• Drying Medium: Effluent Gas
• Operational Method: Continuous
• Type: Continuous Vacuum
• Application Industry: SMT, Semiconductor, Electronic
• Temp. Range: 40-300 Degree
• Pressure Range: 101-0.1kpa
• Maximum Temp. Reach Time: About 60-80 Minutes
• Weight: About 426kg
• Transport Package: Wooden Package
• Specification: 216L
• Trademark: GMS
• Origin: Shenzhen, China
• HS Code: 8514109000
• Production Capacity: 600PCS/Year

Product Description

High Temperature Vacuum Oven


Product Description
Vacuum ovens are ideal for removing residual water, solvents or other volatile compounds from temperature-sensitive products. The principle of operation, essentially, is to remove unwanted molecules by lowering the pressure in the oven (creating a vacuum). When the oven pressure reaches the desired vapor pressure of the contaminants, these contaminant molecules evaporate, turn to vapor, and are removed from all areas of the product. This drying is accomplished without the use of excessive heat. Vacuum high temperature ovens are typically used for products that are not heat resistant and are temperature sensitive. This type of oven is widely used in semiconductor, MEMS, electronic area.

Features

1. Easy to operate, fixed value operation, program operation, quick auto stop proceeding, auto stop operation, auto start operation can be realized.
2. Temperature control is PID mode touch screen instrument, single point type or program type temperature control, can be automatically calculated, PV/SV display at the same time, point touch setting, with memory function (such as temperature, time).
3. Digital setting can be realized by special function menu key and up/down key. Program controller with repeat function, divided into 3 segments and 30 steps.
4. With self-diagnostic circuit (temperature sensing abnormality, heater disconnection, automatic over-rise prevention, SSR short circuit), over-rise preventer, leakage protection switch to prevent over-current, key lock and other safety functions.
5. Through the auxiliary menu key, it can realize the operation of over-rise prevention question, deviation correction and key lock setting.
6. Vacuum control mode automatic control, reach the vacuum degree to stop vacuuming, below the lower limit automatically start, so that the cycle of work, constant temperature time is completed, stop working; manually unpressurized air or nitrogen filling.
7. Provide standard and customized functions in a variety of sizes and temperature ranges.

Product Parameters

Performances	Model	GZ-BDT-VC-02
	Temp. Range	40-300ºC
	Pressure Range	101-0.1kPa
	Maximum Temp. Reach Time	About 60-80 minutes
Form	Temp. Regulation Accuracy	±1ºC
	Internal Material	1.5mm stainless steel plate full argon arc welding
	External Material	Cold rolled sheet, drug resistant coating on surface
	Heat-resistant Material	Glass fiber
	Heating Method	Direct heating of the pressure tank wall
	Total Power	8.5KW
Control Method	Program Operation and Status	7-inch LCD touch screen control
	Temp. Control Method	Multi-segment PID algorithm, temperature control accuracy ±0.1ºC
	Temp. Setting Method	Digital setup using dedicated operation function menu keys and up/down keys
	Operational Function	Fixed-value operation, programmed operation, auto-stop operation, auto-start operation
	Program Mode	Customizable upon request
	Additional Feature	Deviation correction function, key lock function, power failure compensation function
	Heater Loop Control	SSR driver + PIH
	Sensor	PT100 Thermocouple
Safety Equipment		Self-diagnostic circuit (temperature sensing abnormality, heater disconnection, automatic overshoot prevention, SSR short circuit) Overshoot prevention, leakage protection switch for overcurrent, key lock function
Norm	External Size(H*W*D/mm)	1900*988*980
	Internal Size(H*W*D/mm)	600*600*600, shelf size(500*500*500)
	Inner  Capacity	216L
	Vent	25KF Flange
	Nitrogen Inlet	16KF Flange
	Power Current	AC380V 23A(50Hz/60Hz)
	Weight	About 426KG

Options

1. Oily scroll pumps
2. Dry scroll pumps

Customization
GMS can provide varying levels of uniformity, size, temperature range; if you have a specific tolerance or specification which must be met, please contact us with your requirements so we can ensure the equipment is designed, tested, and adjusted to meet those requirements.


Packaging & Shipping
Packaging:
Export wooden standard package. (non-log, non-solid wood, no fumigation, meet export standards)

Shipping:
We have the excellent cooperative forwarder to support transportation service including FOB, CIF, DDP and so on, to satisfy customer's special demands.

Service:
GMS Industrial has markets, sales, technical service and network team to provide customers and dealers with comprehensive pre-sales, in-sales and after-sales services. You can communicate with us if you have any questions and requirements.
24 hours online. Messages will be replied as soon as they are received.